HY111Iron casting repair agent

HY111 cast iron repair agent has good comprehensive mechanical properties, suitable for gray cast iron, ductile iron and other materials, used for the repair and regeneration of cast iron. Iron casting repair agent is widely used for filling casting defects and repairing wear, corrosion and scratches of iron parts.

Contact Supplier

product description

Instructions
1. Surface treatment: Grind and roughen the surface to be repaired to a depth of more than 1mm and then clean it with HY755 cleaning agent or acetone. The surface to be trimmed must be clean, free of water and oil.
2 Mixing: Weigh components A and B according to the specified weight ratio, and mix them thoroughly to make the color completely consistent.
3 Coating: Use a rubber knife to apply the matched cast iron repair agent to the surface to be repaired. You can apply a small amount first, press it repeatedly with a rubber knife, and then apply the remaining repair agent after fully infiltrating, leaving a margin for processing.
4. Curing: After curing at room temperature for 12 hours, all kinds of mechanical processing can be carried out. When the ambient temperature is lower than 15, the curing time can be appropriately extended. 3 hours can shorten curing time and obtain good coating performance.

Product specification: 500g/set, 12 sets/box

标签：Iron casting repair agent

Factory Tour

tags：

Previous：HY112Cast steel repair agent Next：没有了

HY111Iron casting repair agent

Helen:+8615093235871