Once cooperation, lifelong friends!

Do you know how to use HY938 led bulb glue?

日期:2022-07-04 17:32:42 点击: 来源:Jiagu|Ralead

HY938 is a one-component ms polymer silicone material, which has the advantages of no solvent, no isocyanate, anti-pollution after curing, green environmental protection, excellent heat resistance and anti-aging ability.

This product meets the environmental protection requirements of GB 33372-2020 "Adhesive Volatile Organic Compound Limits" and meets the EU ROHS and REACH environmental protection standards.

Whst's the HY938 silicone sealant features?
  1.Solvent-free, PVC-free, isocyanate-free, non-toxic, odorless, non-polluting, neutral and environmentally friendly. 
  2. The surface has good paintability and is compatible with most paints. It can be sprayed after the surface is dry and does not affect the curing speed.
  3. Excellent thixotropy and extrudability, wide applicable temperature range.
  4. No primer is required, and it has excellent adhesion to metals, electrophoretic steel, ABS and other materials.
  5. Excellent weather resistance, aging resistance, superior tensile and compression resilience.

What's application of HY938?
  Sealing and bonding of led bulbs,led panels and solar light head sealant.
  Sealing, bonding and potting of electronic components.
  Sealing, bonding and potting of mechanical and electrical equipment parts.
  Bonding, sealing and potting in other applications.

How to use it?
  1. The bonding surface must be free of oil stains, dust, impurities, etc.
  2. Cut the glue nozzle into the required size and shape according to the process requirements.
  3. Cut off the sealant seal, install the glue nozzle, and put it into the glue gun.
  4. Apply the sealant evenly on the joints, the thinnest part is greater than 1mm; when using the pneumatic gun, the air pressure is controlled at 0.2~0.4Mpa.
  5. After the surface is dry, the product can be trimmed using traditional methods to remove excess glue.

Storage method
This product absorbs moisture and solidifies, and must be stored in a low temperature (below 27°C) and dry environment (relative humidity below 30%). The shelf life is 6 months.

Safety and health
Do not contact uncured sealant products with food and cosmetics;
The uncured sealant should not be in contact with the skin for a long time;
If the sealant accidentally gets into your eyes, you must immediately rinse with plenty of water, and then ask a doctor for examination;
Keep the product out of the reach of children.

标签:led bulb glue
Return Relevant
Chat Now!
Chat Now